SSPB-210K:Ku-Band Block-Up Converter 8W, 10W, and 16W
The SSPB-210K series are hub-mount up-converter transmitters, operating in the Ku-Band. The SSPB-210K is an integrated unit, complete with power supply, phase-locked oscillator, mixer, filter and cooling mechanism. Intended for outdoor operation, the SSPB-210K provides the utmost in convenience and efficiency. Other SSPBs are also available for higher powers or for operation at other up-link frequencies.
Features
|
|
Option
|
Overview
The SSPB-210K series are hub-mount up-converter transmitters, operating in the Ku-Band. The SSPB-210K is an integrated unit, complete with power supply, phase-locked oscillator, mixer, filter and cooling mechanism. Intended for outdoor operation, the SSPB-210K provides the utmost in convenience and efficiency. Other SSPBs are also available for higher powers or for operation at other up-link frequencies.
The hub-mount SSPB-210K is constructed in a compact cooling enclosure for outdoor operation. The units are weatherproof. They are the smallest fully integrated units on the market today.
The design of these units is based on Advantech's industry proven reliable solid-state high power amplifiers. Built-in design features and assembly methods incorporated with efficient combining techniques result in a device with exceptional linearity and operating efficiency. The use of high efficiency power supply and conservative thermal designs contribute to the trouble-free operation of the unit.
Built-in microprocessor controller provides the capability for serial port interfaces (RS485) for remote monitoring and control.
The hub-mount SSPB-210K is constructed in a compact cooling enclosure for outdoor operation. The units are weatherproof. They are the smallest fully integrated units on the market today.
The design of these units is based on Advantech's industry proven reliable solid-state high power amplifiers. Built-in design features and assembly methods incorporated with efficient combining techniques result in a device with exceptional linearity and operating efficiency. The use of high efficiency power supply and conservative thermal designs contribute to the trouble-free operation of the unit.
Built-in microprocessor controller provides the capability for serial port interfaces (RS485) for remote monitoring and control.
Application
The SSPB-210K series are intended to operate in conjunction with indoor mounted L-Band Transceivers and modems. The SSPB's convert an L-Band signal (950-1450 MHz or 950 “1700 MHz) to the Ku-band frequency of 14.0-14.5 GHz or extended Ku-band (13.75 “14.5 GHz). Designed for Ku-Band satellite up-link applications, the SSPB K series are available in output power from 1W to 300W. The SSPB-210K series are fully integrated units up to 10W output power designed for mounting outdoors, near the hub of an antenna.
| TECHNICAL SPECIFICATIONS |
8W
|
10W
|
16W
|
||||||
| Electrical Characteristics | |||||||||
|
Availability in this series
|
|
|
|
||||||
|
KS
|
√
|
√
|
√
|
||||||
|
KX
|
√
|
√
|
N/A
|
||||||
|
KL
|
√
|
√
|
√
|
||||||
|
Output power (P1dB) min
|
+39 dBm
|
+40 dBm
|
+41 dBm
|
||||||
|
Conversion gain min.
|
+60 dB
|
+65 dB
|
+65 dB
|
||||||
|
Input /Output frequency range
|
L-Band 950-1450 MHz /Ku-Band 14.0-14.5 GHz
(SSPB-210 KS series); L-Band 950-1700 MHz/Ku-Band 13.75-14.5 GHz (SSPB-210 KX series) |
||||||||
|
Input Level
|
-22 dBm for P1dB
|
||||||||
|
Gain flatness
|
4.0 dB p-p, typical over 500 MHz, 2.0 dB p-p /40 MHz
|
||||||||
|
Attenuation range
|
20 dB typical
|
||||||||
|
Gain variation over temperature
|
3.0 dB max over full operating range
|
||||||||
|
Input VSWR, in-band
|
1.4: 1
|
||||||||
|
Output VSWR
|
1.5: 1
|
||||||||
|
Input impedance
|
50 Ω
|
||||||||
|
Output impedance
|
50 Ω
|
||||||||
|
Noise Figure
|
15 dB, typical
|
||||||||
|
Spurious (in-band) at rated power
|
-60 dBc, max
|
||||||||
|
AM/PM conversion
|
3°/dB typical (at P1dB)
|
||||||||
|
Third order IMD (2 tones)
|
-25 dBc, max at 3 dB total back-off from P1dB
|
||||||||
|
Local Oscillator frequency (LO)
|
13.05 GHz (KS series); 12.80 GHz (KX series); 11.80 GHz (KL series)
|
||||||||
|
LO leakage
|
< -20 dBm
|
||||||||
|
Phase noise
|
|
||||||||
|
Integrated (SSB) Phase Noise
|
2° RMS typical
|
||||||||
|
Group Delay Linear
(over any 40 MHz): Parabolic Ripple |
0.02 ns /MHz, max
0.003 ns/MHz2, max 1 nsec p-p, max |
||||||||
|
Rejection in receive band
|
-55 dBc
|
||||||||
| External reference | |||||||||
|
Reference frequency
|
10 MHz | ||||||||
|
Recommended reference frequency phase noise
|
|
||||||||
| Reference frequency level | 0 dBm ± 5 dB | ||||||||
| External reference | |||||||||
|
Supply voltage
|
36 V to 60 V DC, Optional 110/220 VAC with Autoranging | ||||||||
|
Power consumption (nominal)
|
95W
|
130W
|
140W
|
||||||
| Mechanical Characteristics | |||||||||
| Dimensions (W x H x L) | 15.97 x 12.96 x 25.55 cm (6.29 x 5.10 x 10.06œ) | ||||||||
| Weight | 5 kg (11 lbs) | ||||||||
|
Interfaces:
|
RF input Type N (F) RF output WR75 grooved
RS-485 Serial Port MS3102R20-29P) (option) |
||||||||
| Environmental Conditions | |||||||||
|
Temperature: Operating
Temperature: Storage |
-30°C to +55°C;
Option 1: -40°C to +55°C; Option 2: -50°C to +50°C -55°C to +85°C |
||||||||
| Humidity | 100%, condensing | ||||||||
