SSPB-2100C:Compact C-Band Hub-Mount BUC 25W TO 120W
The SSPB-2100 series are hub-mount up-converter transmitters, operating in the C/X and Ku-Band. The SSPB-2100 is an integrated unit, complete with power supply, phase-locked oscillator, mixer, filter and cooling mechanism. Intended for outdoor operation, the SSPB-2100 provides the utmost in convenience and efficiency. Other SSPB's are also available for higher powers or for operation at other up-link frequencies.
Features
|
|
Option
|
Overview
The SSPB-2100 series are hub-mount up-converter transmitters, operating in the C/X and Ku-Band. The SSPB-2100 is an integrated unit, complete with power supply, phase-locked oscillator, mixer, filter and cooling mechanism. Intended for outdoor operation, the SSPB-2100 provides the utmost in convenience and efficiency. Other SSPB's are also available for higher powers or for operation at other up-link frequencies.
The design of these units is based on ADVANTECH AMT industry proven reliable solid-state high power amplifiers. The use of high efficiency power supply and conservative thermal designs contribute to the trouble-free operation of the amplifier. Built-in microprocessor controller provides the capability for serial port interfaces (RS232/485) for remote monitoring and control.
The design of these units is based on ADVANTECH AMT industry proven reliable solid-state high power amplifiers. The use of high efficiency power supply and conservative thermal designs contribute to the trouble-free operation of the amplifier. Built-in microprocessor controller provides the capability for serial port interfaces (RS232/485) for remote monitoring and control.
|
table A
|
||||
|
Band
|
RF-Band
(GHz) |
IF-Band
(MHz) |
Output Power
|
LO
GHz |
| C-Band | ||||
|
CS
|
5.850 - 6.425
|
950 - 1525
|
16 - 50
|
4.900
|
|
CP
|
6.425 - 6.725
|
1025 - 1325
|
16 - 40
|
5.400
|
|
CI
|
6.725 - 7.025
|
1225 - 1525
|
16 - 40
|
5.500
|
|
CR
|
5.725 - 6.025
|
950 - 1250
|
16 - 50
|
4.775
|
|
CL
|
4.400 - 5.000
|
950 - 1550
|
16 - 50
|
3.450
|
|
CX
|
5.850 - 6.725
|
950 - 1825
|
16 - 40
|
4.900
|
Application
The SSPB-2100 series convert an L-Band signal to the C-band frequency (see table A). Designed for satellite up-link applications, the SSPB series are available in output power from 1W to 500W. The SSPB-2100C series are fully integrated units from 25W to 120W output power designed for mounting outdoors, near the hub of an antenna.
| TECHNICAL SPECIFICATIONS |
25W
|
30W
|
40W
|
50W
|
60W
|
80W
|
100W
|
120W
|
||
| Electrical Characteristics | ||||||||||
|
C-Band CS/CR/
C-Band CP/CI/CX |
√
√ |
√
√ |
√
√ |
√
- |
√
√ |
√
√ |
√
√ |
√
- |
||
|
Output power
(PSAT) dBm |
+44
|
+45
|
+46
|
+47
|
+48
|
+49
|
+50
|
+51
|
||
|
Output power
(P1dB) min dBm |
+43
|
+44
|
+45
|
+46
|
+47
|
+48
|
+49
|
+50
|
||
|
Gain adjustment range
|
20 dB min | |||||||||
|
Input/Output frequency range
|
See table A on front page | |||||||||
|
Max input power without damage
|
+10 dBm | |||||||||
|
Gain flatness
|
±1.5 dB, max over full band, 0.3 dB/10 MHz | |||||||||
|
Gain variation over temperature
|
±1.5 dB over full operating range (temperature compensation mode) | |||||||||
|
Gain variation over 24 hours
|
±0.5 dB max at constant temperature & drive level | |||||||||
|
Input return loss
|
18 dB, min | |||||||||
|
Output VSWR
|
1.5 :1 dB min, | |||||||||
|
Noise power density (NPD)
|
-75 dBm/Hz in TX band -145 dBm/Hz in RX band |
|||||||||
|
Spurious at rated power
|
-55 dBc, max | |||||||||
|
AM/PM conversion
|
2.5°/dB typical (at P 1dB) | |||||||||
|
Third order IMD (2 tones)
|
-24 dBc, max at 3 dB back-off from P 1dB | |||||||||
|
Local Oscillator frequency (LO)
|
See table A on front page | |||||||||
|
LO leakage
|
-20 dBm max | |||||||||
|
Phase noise
|
-50 dBc/Hz at 10Hz -73 dBc/Hz at 1000Hz -93 dBc/Hz at 100 kHz -63 dBc/Hz at 100Hz -83 dBc/Hz at 10 kHz -105 dBc/Hz at 1 MHz |
|||||||||
|
Group delay (over any 40 MHz):
Linear Parabolic Ripple |
0.02 ns /MHz, max 0.003 ns/MHz2, max 1 nsec p-p, max |
|||||||||
| External reference | ||||||||||
| Reference frequency | 10 MHz | |||||||||
|
Reference frequency phase noise
|
|
|||||||||
| Reference frequency level | 0 dBm ± 5 dB supplied via input L-Band cable | |||||||||
| Power Requirements | ||||||||||
| AC input voltage | 110 /220 VAC (47-63 Hz) auto-ranging (90-132 V / 180-264 V) | |||||||||
| Power consumption (W nominal) | 150 | 180 | 200 | 300 | 350 | 400 | 450 | 500 | ||
| Mechanical Characteristics | ||||||||||
|
Dimensions (L x W x H)
|
|
|||||||||
| Weight |
|
|||||||||
| Interfaces RF input Type N (F) Interfaces RF output C-Band CPR137 |
RS-485 MS3112E10-6P AC Line MS3102R10SL-3P | |||||||||
| Environmental Conditions | ||||||||||
|
Temperature: Operating
Temperature: Storage |
-30°C to +55°C; Option: E-40°C to +55°C; G: -50°C to +50°C
-55°C to +85°C |
|||||||||
| Humidity | 100%, condensing (2" rain/hour) | |||||||||
| Altitude | 10,000' AMSL, de-rated 2°C/1,000' from AMSL | |||||||||
